fbpx

Cryomed Pro

ºCRYO FACIAL

We offer a number of relaxing beauty and skincare treatments that range from 15 minutes to an hour, and will leave your skin visibly smoother and plumper with a restored youthful glow.

What is Cryomed PRO?

Cryomed PRO was developed according to many years of experience in manufacturing of cryosaunas. A popular model of cryosauna has been improved and equipped with a new features.

Cryotherapy chambers look like a room similar to a stand-up tanning booth, in which the client enters the air is cooled to the estimated temperature.

This next-generation device contains newly developed, CE approved electronic system controlled by touch screen TECO, focusing on reliability and maximum protection of the customer.

Сryomed PRO is also equipped with an emergency stop button on the front panel and accident prevention system in the cabin. The latest model of the cryotherapy chamber also allows connecting to Wi-Fi and gives comfortable access for remote service support in case of any faults.

Cryosauna Cryomed PRO may be comfortable controlled by desktop, smartphone or tablet. Gas supply of new model is constructed in a way it can either work with the Dewar vessel (non-pressurized 40 liters) or with pressurized vessel with capacity up to 5000 liters.

Cryomed Pro is manufactured according to high cosmetic standards and suitable for use in medical facilities. Clients will feel better and look younger and healthier. Whole-body cryotherapy is a medical treatment widely used in beauty procedures and sports medicine.

Video

Benefits of Cryomed PRO

  • 10“ inches TECO touch screen
  • Accident prevention system:
  • – open door sensor
  • – patient‘s ultrasonic position sensor in the cabin
  • – safety shut down with an effective ventilation system
  • 3 years warranty for components max. 3000 procedures (what comes first)
  • Remote controlling the device by a desktop, tablet or smartphone
  • Smart multimedia system with Full HD 10‘‘ inches tablet PC with USB port
  • Acoustic stereo system 2 × 120 watt
  • Wi-Fi or LAN Connectivity – easy updating of software and optimizing all the features
  • Active reporting system – current figures of the device sent directly into an email

ºCRYO FACIAL

We offer a number of relaxing beauty and skincare treatments that range from 15 minutes to an hour, and will leave your skin visibly smoother and plumper with a restored youthful glow.

  • Innovative technology of nitrogen dosing with fully automatic treatment temperature leveling
  • Own Start-Up screen logo
  • Independent three – RGB LED lighting zones
  • Two type of nitrogen source connectivity to the device:
  • – Dewar vessel 40 l
  • – Pressurized cylinder with capacity from 100 to 5000 l
  • High-quality of industrial components and controllers (Teco, Schneider) are the guarantee of long-term lifetime of Cryomed Pro
  • Customizable cryosauna according to customer requirements
  • Suitable to install into the vehicle as a mobile unit
  • Low nitrogen consumption
  • Simple and easy preparation steps of the device before procedure

For information regarding the price of cryotherapy chambers please contact us at Contact@cryomisr.com or push the button below

Reliable business within a small working space

Cryosauna Cryomed PRO – it is a good investment move, good for the health of your customers and good for a business interest of you, as an owner. Just 6 m2 needed to start with.

Cryosauna – it is the right investment. When people come for treatment, they invest in their health. By investing in Cryosauna you can launch a reliable business without a large capital, without putting all on the line.

ºCRYO FACIAL

We offer a number of relaxing beauty and skincare treatments that range from 15 minutes to an hour, and will leave your skin visibly smoother and plumper with a restored youthful glow.

Room requirements

Cryosauna Cryomed PRO needs a very small area for setup. In fact, 6 m2 is adequate to provide enough space for operation. However, due to the machine’s weight not exceed 350 kg it must be installed on a solid floor (concrete or properly tiled floor), NOT on flooring made of wooden panels etc.

When deciding on a room in which to set up Cryosauna be sure to measure the size of ANY door frames you will need to use in order to deliver Cryosauna components inside the room. Door frame width of any doors MUST be at least 670 mm to make the delivery possible.

You have to provide an opening in the room wall (120 mm in diameter) for an exhaust system so that nitrogen vapors can be extracted properly while Cryosauna is in operation. The hole for the pipe can either be made in the wall or the pipe can be integrated in the window (vent sash) as long as proper tight fit for the hose is provided.

Air-conditioning and ventilation with actively circulating air (both in and out) are strongly advised. Addition of oxygen sensors is recommended too.

The ambient room temperature should be between 15 °C and 24 °C and the humidity should not exceed 60 %. The distance from the walls to either side of the machine should be at least 300 mm (30 cm).

The entire assembly of Cryosauna PRO takes roughly 2 hrs. Cryosauna must be operated by trained staff who successfully completed appropriate training and received a certificate.

How much does a cryotherapy chamber cost? This is usually the first question asked about cryo-equipment. Cryosauna’s pricing depends on a number of technical characteristics but clients are often surprised to find Cryosauna cost less than one might expect.

Feature

POWER SUPPLY

Maximum Power Consumption, KW

Unit Weight, Kg

Dimensions LxWxH, Mm

Temperature Inside The Cabin

Cooling Duration

Liquid Nitrogen Consumption (precooling), L

Liquid Nitrogen Consumption (treatment), L

VALUES

220V ± 22V AC, 50Hz / 110V ± 11V AC, 50-60Hz

1,5

Less than 400

2200х1550х900 (2450х1550х900)

from -110°C to -190°C

1 min

2

1 per minute

Feature & VALUES

POWER SUPPLY

220V ± 22V AC, 50Hz / 110V ± 11V AC, 50-60Hz

Maximum Power Consumption, KW

1,5

Unit Weight, Kg

Less than 400

Pipe length

1,4 m

Precooling time (-100º С)

Less than 4 min

Gas stream temperature (max.)

-120º С

Liquid nitrogen consumption for one session (10 min, -100º С)

0,6 l

Protection

IP50

BOOK AN APPOINTMENT

BEGIN YOUR CRYOMISR JOURNY

NEED TO KNOW MORE

BEFORE YOU START YOUR CRYOMISR JOURNEY

BOOK AN APPOINTMENT

BEGIN YOUR CRYOMISR JOURNY

NEED TO KNOW MORE

BEFORE YOU START YOUR CRYOMISR JOURNEY

Stay updated on new products, events, and more

Stay updated on new products, events, and more